SS bathroom vanity installation procedure
Stainless steel bathroom vanity mainly includes faucet,mirror and cabinet, etc. The installation of the ss bathroom cabinet quality will directly affect the future usage and the aesthetic of the bathroom. We can diy some simple installation,it’s convenient and save money. So how to install china stainless steel bathroom cabinet?
Basin installation
Whether countertop or undercounter, basin top or countertop should be in height from the ground 80 ~ 85 centimeters. After measuring the height, mark the position. reserved water supply and drainage piping space, install the steel bracket which was holding the basin, burnish of countertop hole. According to the counter size correct and fauset,cut the faucet mounting holes and grind. Put the basin in the hole, check the clearance, and mark. After coated with silicone sealing material on the edge of the basin, put the basin on the countertop mounting holes, connect the sinks and countertops. Undercounter edge glue, installed hardware, such as sealant after hardening, connection and drain the water.
The faucet installation
To insert the hose to the faucet mouth, hand tight, pack the hose through the basin,fix with accessories, in the end, put the basin in the location specified, then connect the other end of the hose and feed line interface.
The bathroom cabinet installation
Normally installation height is cabinet surface from the ground about 80 cm - 85 cm. First determine of hanging wall cabinet put oneself in another's position, then use of impact drill holes. Before connecting screws, you first need to expansion colloidal particles in the screw holes installation, install screw connection cabinet put it in another's position and metope. Cabinet put oneself in another's position is fixed to the wall, you can install the cabinet put oneself in another's position shake handshandle. After the last stage basin, cabinet put oneself in another's position is installed, the next is to install the bathroom mirror.
The mirror installation
1.drilling. Nail fixation method need to use the screw to the mirror hanging on the wall, so must use glass drill holes on the back of the mirror, ahead of the location of the hole should be consistent with the fixed position of metope screw, otherwise can't install. When a hole on the back of the mirror also note that the hole position to distributed evenly and not to get too close to the edge of otherwise it is easy to result in the crack of the mirror. At the same time, also need to use in metope drill hole, and the expansion of plastic pipe into the hole.
2.fixed mirror. Mirror fixed need to use screws. Will mirror the holes and the expansion of plastic pipe - after a corresponding on metope, fixed by screw.
3. sealing glue. After good hanging mirror, in order to enhance the stability, ensure the use safety, also need to around the mirror use a sealing paste for edge processing. The sealing paste evenly daub can around the seam, it is important to note before the glue not dry the water must be avoided.
